CNC Vertical Machining Center

5 Axis Simultaneous Machining Center

Double Column Machining Center


Products CNC Vertical Machining Center Box Way



Coolant-Through-Spindle provides coolant directly to the machining process through the center of the spindle. CTS may extend the life of the cutting tool and improve the evacuation of chips, especially when used for deep hole drilling and pocket milling.


Finetech's model 1890 and larger use ø63mm ball screws to handle heavier cutting and table loads while still providing smooth motion.

SPINDLE CHILLER ( Oil or Water )

The spindle chiller will help maintain a stable spindle temperature and will reduce the effects of thermal expansion of the spindle main shaft as well as extend the life of the spindle.


The Finetech R&D team can design both hardware and software components for the machine tools and allows for better quality control and quick response to customers requests.


Each T-Slot is ground to a H8 tolerance to provide an accurate datum surface allowing for easy and precise machine setup.


A precision ground surface can be added to each axis to allow for easy installation of linear scales by ensuring a straight and parallel surface.

Travel X-axis (mm) 2500
Y-axis (mm) 1000
Z-axis (mm) 1000
Spindel center to column (mm) 1055
Spindle nose to table surface (mm) Taper 40/150-1150 mm, Taper 50/250-1250 mm
Table Table (LxW) (mm) 2600 x 1000
T-slot (No. x Width) (mm) 5 x 22 x 160
Max. table load (kgs) 2500
Max. Traverse Speed X / Y / Z-axis (M/min) 15 / 15 / 12
ATC Swing Arm type BT-40 (Opt.) (T) 24 / 30
Chain type BT-50 (Opt.) (T) 32 / 40 / 48
Spindle Type-CAT/BT/DIN (Opt. HSK) 40 / 50
Motor (Other power options) (kW) 15~18.5 (18.5~22)
Belt-drive BT-40 (Opt.) 8000 rpm (10000 / 12000 rpm)
Direct-drive BT-40 (Opt.) 10000 / 12000 / 15000 rpm
Build-in spindle (Opt.) 20000 / 30000 rpm (BT-40/ HSK-E40/50/63)
Belt-drive BT-50 (Opt.) 6000 / 8000 rpm
Direct-drive BT-50 (Opt.) 8000 / 10000 rpm
Miscellaneous Power consumption (KVA) 60
Pneumatic supply (kg/cm2) 5.5~6.5
Coolant tank capacity (L) 650
Machine weight (kg) 30000
Floor space requirement (LxW) (mm) 6000 x 3700
Floor space requirement (with conveyor) (LxW) (mm) 7300 x 3700
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.


  • 8,000rpm belt type #40 taper spindle
  • Spindle chiller
  • Rigid tapping
  • Spindle bearing air purge
  • Z axis motor with brake system
  • Guideway covers (X,Y,Z)
  • Central lubrication system
  • Fully enclosed machining area
  • Wash down system
  • Safety Door
  • Mechanical oil/coolant separator
  • LED work light
  • Heat exchanger for electrical cabinet
  • Coolant pump
  • Spindle coolant nozzle system
  • Auxiliary coolant gun
  • Cutting air blast
  • Auxiliary air gun
  • Tool kit
  • 3-color beacon light
  • Leveling blocks & bolts
  • Auto interrupt & power off system (M30)
  • Portable hand wheel
  • CNC control manuals, Operation manual, Maintenance manual
  • Inspection report (CD format)


  • Coolant Through Spindle (20-70Bar)
  • Paper-type filter for CTS system
  • Linear scale
  • Programmable cutting coolant nozzle
  • Oil mist coolant system
  • Oil mist collector
  • Chain type chip conveyor with chip cart
  • Screw type chip auger with chip cart
  • Laser type tool length measurement system
  • Contact type tool length measurement system
  • Workpiece measurement kinematic system
  • 4th axis rotary table
  • 4th/5th axis tilt/rotary table
  • CE Certification
  • Disk type oil Skimmer
  • Air conditioner for electrical cabinet
  • Transformer
  • Jager high performanec spindles
  • Mitsubishi M80, M830
  • Fanuc 0iMF, 31i
  • Siemens 828D, 840D
  • Heidenhain TNC620, iTNC640
  • Fagor