CNC Vertical Machining Center

5 Axis Simultaneous Machining Center

Double Column Machining Center

Products CNC Vertical Machining Center Combination Way

Combination Way

Combination Way

  • The casting assembly of the SMV machining centers has been designed using a Finite- Element-Analysis process to ensure the machine will handle cutting forces and weight loads associated with the demands of the machine specifications.
  • The X and Y axes utilize roller type linear guideways to allow the machining center to accommodate heavy work piece loads with fast accelerations and low friction while maintaining accurate positioning.
  • The Z axis uses box way design to allow the machining center to dampen heavier cutting forces.
  • The machine base and saddle base utilize a wide design to prevent sagging and overhanging concerns with heavy work piece loads.
  • The Z axis casting uses a reinforced rib design to achieve structural strength through the entire casting length.
  • Each axis motor is directly coupled to the ball screw.
  • Each axis will use a grade C3 precision ground ball screw and will use a pre-tensioned design to improve machine performance.
Combination Way
Detailed introduction
SMV–1060–2LB

SMV–1060–2LB

Travel : X1000 Y600 Z560 mm
Table : L1100 x W500 mm

SMV–1270–2LB

SMV–1270–2LB

Travel : X1200 Y700 Z650 mm
Table : L1300 x W600 mm

SMV–1485–2LB

SMV–1485–2LB

Travel : X1400 Y850 Z850 mm
Table : L1500 x W800 mm

SMV–1570–2LB

SMV–1570–2LB

Travel : X1500 Y700 Z650 mm
Table : L1650 x W700 mm

SMV–1670–2LB

SMV–1670–2LB

Travel : X1600 Y700 Z650 mm
Table : L1750 x W700 mm

SMV–1685–2LB

SMV–1685–2LB

Travel : X1600 Y850 Z850 mm
Table : L1600 x W800 mm

SMV–1890–2LB

SMV–1890–2LB

Travel : X1800 Y1000 Z900 mm
Table : L1950 x W900 mm

SMV–2090–2LB

SMV–2090–2LB

Travel : X2000 Y900 Z900 mm
Table : L2150 x W900 mm

SMV–2290–2LB

SMV–2290–2LB

Travel : X2200 Y900 Z900 mm
Table : L2150 x W900 mm

SMV–2590–2LB

SMV–2590–2LB

Travel : X2500 Y900 Z900 mm
Table : L2600 x W1000 mm