CNC Vertical Machining Center

5 Axis Simultaneous Machining Center

Double Column Machining Center


Products CNC Vertical Machining Center Box Way


  • Rapid feed rate 20m / min


Coolant-Through-Spindle provides coolant directly to the machining process through the center of the spindle. CTS may extend the life of the cutting tool and improve the evacuation of chips, especially when used for deep hole drilling and pocket milling.


Finetech's model 1890 and larger use ø63mm ball screws to handle heavier cutting and table loads while still providing smooth motion.

SPINDLE CHILLER ( Oil or Water )

The spindle chiller will help maintain a stable spindle temperature and will reduce the effects of thermal expansion of the spindle main shaft as well as extend the life of the spindle.


The Finetech R&D team can design both hardware and software components for the machine tools and allows for better quality control and quick response to customers requests.


Each T-Slot is ground to a H8 tolerance to provide an accurate datum surface allowing for easy and precise machine setup.


A precision ground surface can be added to each axis to allow for easy installation of linear scales by ensuring a straight and parallel surface.

Travel (mm)  X-axis 1600 mm
Y-axis 700 mm
Z-axis 650 (Opt. 700mm)
Distance (mm) Spindel center to column 730 mm
Spindel nose to table 130-780 mm / (Opt. 130-800mm)
Table Table (LXW) (mm) 1750 x 700 mm
Dimesnsion of T-slot (mm) 5 x 18 x 115 mm
Max. table load (kg) 1400kgs
Spindle Spindle Taper-40 BT/CAT/DIN (HSK Opt.)
Spindle motor- cont/ 30min (kw) 11-15 kw (15-18.5 kw Opt.)
Belt drive spindle (Taper-40) 8000rpm (10000rpm and 12000rpm Opt.)
Direct driver spindle (Taper-40) 10000rpm, 12000rpm and 15000rpm Opt.
Build-in spindle (Taper-40/ HSK-E40/50/63) 20000rpm / 30000rpm Opt.
Belt drive spindle (Taper-50) 6000rpm / 8000rpm Opt.
Direct driver spindle (Taper-50) 8000rpm / 10000rpm Opt.
ATC ATC-Swing Arm type 24 / 30 tools Opt.
ATC-Chain type 32 / 40 tools Opt.
Feed Rate Rapid feed rate-X/Y/Z 20/20/15 m/min
Axis feed motor- X/Y/Z 3.0/3.0/3.0 kw
Cutting feedrate by table 10 m/min
X ballscrew (dia. x pitch) 50 x 10 mm
Y ball screw (dia. x pitch) 50 x 10 mm
Z ball screw (dia. x pitch) 50 x 10 mm
Linear guide width ( X/Y/Z) 100mmx2 / 100mmx4 / 100mmx2
Machine Power consumption KVA (Transformer) 45 KVA
Pneumatic Supplier kg/ cm2 5.5-6.5 kg/cm2
Coolant tank capacity 501 liter
Floor space requirement 4520 x 2240 cm
Floor space requirement (with conveyor) 5680 x 2040 cm
Machine weight 12000 kgs
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.


  • Tools kit
  • LED work light
  • 3-step warning light
  • Leveling blocks & blots
  • Fully enclosed splash guard
  • Rigid Tapping
  • Standard Spndle 8000rpm (belt type)
  • Spindle coolant nozzle system
  • Spindle Air Blast
  • Central Lubrication system
  • Auto interrupt& power off system
  • Portable hand wheel
  • Opreation manual, Maintenance manual
  • CNC Manual
  • Test Report in CD format
  • Air gun
  • Coolant gun
  • Guideway cover (X,Y,Z)
  • Heat Exchanger for Electrical Cabinet
  • Safety door
  • Spindle coolant system
  • Cutting air blast
  • Cutting coolant system
  • Spindle oil chiller
  • Chip flush coolant system


  • Oil skimmer
  • CTS 20-70BARS
  • Linar scale
  • Oil mist coolant system
  • Oil mist collector
  • Belt type chip conveyor
  • Screw type chip conveyor
  • Workpiece measurement system
  • Auto Tool touch probe
  • Auto Tool Laser probe
  • A/C Cooler for Electrical Cabinet
  • 4th Axis Rotary table
  • 5th Axis Tilting Rotary table
  • Heavy Duty coolant pump
  • CE
  • Paper Filter
  • Machine Height 150mm More
  • ZF Gear Box
  • Mitsubishi M80, M830
  • Fanuc 0iMF, 31i
  • Siemens 828D, 840D
  • Heidenhain TNC620, iTNC640
  • Fagor