CNC Vertical Machining Center

5 Axis Simultaneous Machining Center

Double Column Machining Center

Electrical Discharge Machines

EDM Hole Drilling

SMV–1370–H3L

Products CNC Vertical Machining Center Linear Way

SMV–1370–H3L

  • Cross Roller Linear ways
  • Rapid feed rate 30m / min
  • 4 cross linear way on Y axis

COOLANT-THROUGH-SPINDLE (CTS) 20-70 BAR (Optional)

Coolant-Through-Spindle provides coolant directly to the machining process through the center of the spindle. CTS may extend the life of the cutting tool and improve the evacuation of chips, especially when used for deep hole drilling and pocket milling.

Ø63mm EXTRA LARGE BALLSCREW

Finetech's model 1890 and larger use ø63mm ball screws to handle heavier cutting and table loads while still providing smooth motion.

SPINDLE CHILLER (Oil or Water)

The spindle chiller will help maintain a stable spindle temperature and will reduce the effects of thermal expansion of the spindle main shaft as well as extend the life of the spindle.

IN HOUSE CIRCUIT DESIGN

The Finetech R&D team can design both hardware and software components for the machine tools and allows for better quality control and quick response to customers requests.

T-SLOT GRINDING

Each T-Slot is ground to a H8 tolerance to provide an accurate datum surface allowing for easy and precise machine setup.

LINEAR SCALE MOUNTING SURFACE

A precision ground surface can be added to each axis to allow for easy installation of linear scales by ensuring a straight and parallel surface.

Travel (mm)  X-axis 1300 mm
Y-axis 700 mm
Z-axis 650 mm
Distance (mm) Spindel center to column 730 mm
Spindel nose to table 150-800 mm
Table Table (LXW) (mm) 1450 x 700 mm
Dimesnsion of T-slot (mm) 5 x 18 x 100 mm
Max. table load (kg) 1000 kgs
Spindle Spindle Taper-40 BT/CAT/DIN (HSK Opt.)
Spindle motor- cont/ 30min (kW) 11-15 kW (15-18.5kW Opt.)
Belt drive spindle (Taper-40) 8000rpm (10000rpm and 12000rpm Opt.)
Direct driver spindle (Taper-40) 10000rpm, 12000rpm and 15000rpm Opt.
Build-in spindle (Taper-40/ HSK-E40/50/63) 20000rpm / 30000rpm Opt.
Belt drive spindle (Taper-50) 6000rpm/ 8000rpm Opt.
Direct driver spindle (Taper-50) 8000rpm/ 10000rpm Opt.
ATC ATC-Swing Arm type 24/30 tools Opt.
ATC-Chain type 32/ 40 tools Opt.
Feed Rate Rapid feed rate-X/Y/Z 25/25/25 m/min
Axis feed motor- X/Y/Z 4.0/4.0/4.0 kW
Cutting feed rates by table 10 m/min
X ballscrew (dia. x pitch) 50 x 10 mm
Y ball screw (dia. x pitch) 50 x 10 mm
Z ball screw (dia. x pitch) 40 x 10 mm
Linear guide width ( X/Y/Z) 35mmx2 / 45mmx4 / 45mmx4 (opt. 45)
Machine Power consumption KVA (Transformer) 45 KVA
Pneumatic Supplier kg/ cm2 5.5-6.5 kg/cm2
Coolant tank capacity 510 liter
Floor space requirement 3650 x 2220 cm
Floor space requirement (with conveyor) 4620 x 2220 cm
Machine weight 9000 kgs
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.

Standard

  • Tools kit
  • LED work light
  • 3-step warning light
  • Leveling blocks & blots
  • Fully enclosed splash guard
  • Rigid Tapping
  • Standard Spndle 8000rpm (belt type)
  • Spindle coolant nozzle system
  • Spindle Air Blast
  • Central Lubrication system
  • Auto interrupt& power off system
  • Portable hand wheel
  • Operation manual, Maintenance manual
  • CNC Manual
  • Test Report in CD format
  • Air gun
  • Coolant gun
  • Guideway cover (X,Y,Z)
  • Heat Exchanger for Electrical Cabinet
  • Safety door
  • Spindle coolant system
  • Cutting air blast
  • Cutting coolant system
  • Spindle oil chiller
  • Chip flush coolant system

Optional

  • Oil skimmer
  • CTS 20-70BARS
  • Linar scale
  • Oil mist coolant system
  • Oil mist collector
  • Belt type chip conveyor
  • Screw type chip conveyor
  • Workpiece measurement system
  • Auto Tool touch probe
  • Auto Tool Laser probe
  • A/C Cooler for Electrical Cabinet
  • 4th Axis Rotary table
  • 5th Axis Tilting Rotary table
  • Heavy Duty coolant pump
  • CE
  • Paper Filter
  • Machine Height 150mm More
  • ZF Gear Box
  • Mitsubishi M80, M830
  • Fanuc 0iMF, 31i
  • Siemens 828D, 840D
  • Heidenhain TNC620, iTNC640
  • Fagor