CNC Vertical Machining Center

5 Axis Simultaneous Machining Center

Double Column Machining Center


Products CNC Vertical Machining Center Linear Way


  • Cross Roller Linear ways
  • Rapid feed rate 36m / min


Coolant-Through-Spindle provides coolant directly to the machining process through the center of the spindle. CTS may extend the life of the cutting tool and improve the evacuation of chips, especially when used for deep hole drilling and pocket milling.


Finetech's model 1890 and larger use ø63mm ball screws to handle heavier cutting and table loads while still providing smooth motion.


The spindle chiller will help maintain a stable spindle temperature and will reduce the effects of thermal expansion of the spindle main shaft as well as extend the life of the spindle.


The Finetech R&D team can design both hardware and software components for the machine tools and allows for better quality control and quick response to customers requests.


Each T-Slot is ground to a H8 tolerance to provide an accurate datum surface allowing for easy and precise machine setup.


A precision ground surface can be added to each axis to allow for easy installation of linear scales by ensuring a straight and parallel surface.

Travel (mm)  X-axis 710 mm
Y-axis 450 mm
Z-axis 460 mm
Distance (mm) Spindel center to column 514 mm
Spindel nose to table 130-590 mm
Table Table (LXW) (mm) 760 x 420 mm(opt. 760 x 500 mm)
Dimesnsion of T-slot (mm) 3(5) x 18 x 100 mm
Max. table load (kg) 450 kgs
Spindle Spindle Taper-40 BT/CAT/DIN (HSK Opt.)
Spindle motor- cont/ 30min (kW) 5.5-7.5 kW
Belt drive spindle (Taper-40) 8000rpm (10000rpm and 12000rpm Opt.)
Direct driver spindle (Taper-40) 10000rpm, 12000rpm and 15000rpm Opt.
Build-in spindle (Taper-40/ HSK-E40/50/63) 20000rpm / 30000rpm Opt.
Belt drive spindle (Taper-50) N/A
Direct driver spindle (Taper-50) N/A
ATC ATC-Swing Arm type 24 tools Opt.
ATC-Chain type N/A
Feed Rate Rapid feed rate-X/Y/Z 36/36/32 m/min
Axis feed motor- X/Y/Z 2.0/2.0/3.0 kW
Cutting feed rates by table 10 m/min
X ballscrew (dia. x pitch) 32 x 12mm
Y ball screw (dia. x pitch) 32 x 12mm
Z ball screw (dia. x pitch) 32 x 12mm
Linear guide width ( X/Y/Z) 30mmx2 / 35mmx2 / 35mmx2
Machine Power consumption KVA (Transformer) 25 KVA
Pneumatic Supplier kg/ cm2 5.5-6.5kg/cm2
Coolant tank capacity 256 liter
Floor space requirement 2180 x 2040 cm
Floor space requirement (with conveyor) 3282 x 2040 cm
Machine weight 4800 kgs
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice


  • Tools kit
  • LED work light
  • 3-step warning light
  • Leveling blocks & blots
  • Fully enclosed splash guard
  • Rigid Tapping
  • Standard Spndle 8000rpm (belt type)
  • Spindle coolant nozzle system
  • Spindle Air Blast
  • Central Lubrication system
  • Auto interrupt& power off system
  • Portable hand wheel
  • Operation manual, Maintenance manual
  • CNC Manual
  • Test Report in CD format
  • Air gun
  • Coolant gun
  • Guideway cover (X,Y,Z)
  • Heat Exchanger for Electrical Cabinet
  • Safety door
  • Spindle coolant system
  • Cutting air blast
  • Cutting coolant system
  • Spindle oil chiller
  • Chip flush coolant system


  • Oil skimmer
  • CTS 20-70BARS
  • Linar scale
  • Oil mist coolant system
  • Oil mist collector
  • Belt type chip conveyor
  • Screw type chip conveyor
  • Workpiece measurement system
  • Auto Tool touch probe
  • Auto Tool Laser probe
  • A/C Cooler for Electrical Cabinet
  • 4th Axis Rotary table
  • 5th Axis Tilting Rotary table
  • Heavy Duty coolant pump
  • CE
  • Paper Filter
  • Machine Height 150mm More
  • Mitsubishi M80, M830
  • Fanuc 0iMF, 31i
  • Siemens 828D, 840D
  • Heidenhain TNC620, iTNC640
  • Fagor